EZ-Poxy White 3175 Aerosol - (MW)

Pettit EZ-Poxy Topside Marine Paint Aerosol

There are a lot of choices in topside marine paints, however, Pettit is an industry leader that creates superior marine grade products for all your marine finishing needs. That is why Wholesale Marine recommends the Pettit Easypoxy line of topside marine paints. Pettit Easypoxy paint is a great choice for areas above the waterline, as well as for refinishing decks.

Pettit Easypoxy is manufactured with an advanced polyurethane formula that, when applied, creates a long-lasting, glossy, gelcoat-like, surface finish with very little effort. This topside paint is silicone-based and goes on smoothly to create a streak-free finish. A high gloss paint, Pettit EZ Poxy has ultraviolet filters to ensure that the paint is durable and effective at providing a brilliant shine. Another plus: the finish is also fade-resistant over time. Easypoxy applies quickly using a roll and top method so that even a novice painter can achieve amazing results.

Features:

• Highest gloss finish Topside Enamel Paint
• Creates a tough, weather-resistant coating
• Very easy to apply, and offers excellent, streak-free coverage (For larger projects, Wholesale Marine recommends using the roll-and-tip application technique.)
• Advanced ultraviolet filters enable this formulation to resist finish breakdown for superior gloss retention
• NOTE: Ground-shipped within the Continental U.S. only

Specifications:

• Finish: High-gloss
• Coverage: 30 sq. ft/gal.
• Number of Coats: 2 minimum
• Size: 15.34oz Aerosol Spray

Be sure to shake the Pettit Easypoxy aerosol spray thoroughly before use. Apply one thin, even coat of EZ Poxy per day. After an overnight dry, lightly sand with 220 grit sandpaper and apply a second coat.

• Number of Coats: 2 Minimum
• Dry Film Thickness per Coat: 1.5 mils (3 wet mils)
• Coverage: 600 sq. ft/gal.
• Application Temp: 50°F Min. / 90°F Max.
• Thinner: 120 Brushing, 121 Spraying

Fiberglass Application System

Non-Fiberglass Surface Preparation

Bare Wood:

• Sand surface smooth with 80-120 grit sandpaper, then solvent clean with Pettit 120 Thinner to remove residue.
• Fill all screw heads or small holes with 7050 EZ-Fair Epoxy Fairing Compound; sand flush and solvent clean with Pettit 120 Thinner.
• Apply a coat of 2018 EZ WoodSealer to penetrate and seal the porous grain. Follow with one or two coats of 6149 EZ Prime until an evenly smooth base condition is reached; sand each coat with 80-120 grit sandpaper and solvent clean with Pettit 120 Thinner.
• Proceed with the first finish coat of Pettit Easypoxy.
• Bare wood that has been epoxied must be thoroughly scrubbed with an ammonia/water solution then sanded with 120 grit sandpaper and solvent cleaned with Pettit 120 Thinner.
• Follow with a coat of 6149 EZ Prime to smooth the surface and provide a uniform base.
• Sand well and solvent clean with Pettit 120 Thinner, then proceed with the first coat of Easypoxy.

Application Notes

• Applying two or more coats of EZ Poxy topside marine paint in one day is not recommended. Nor is applying excessively heavy films (greater than 4 wet mils) as this will lead to insufficient through-drying of the paint and will yield soft paint films.
• Do not apply EZ Poxy Paint on extremely humid days (90°+ RH) or when rain is threatening.
• Do not apply in the late afternoon when working outdoors as the wet film may be adversely affected by dew.
• When working in cooler temperatures be sure the air and surface temperatures will remain at or above 50°F for at least 8 hours after application.

Click to Download Pettit Easypoxy Application Instructions

Frequently Asked Questions

What is Pettit EZ-Poxy Topside Marine Paint Aerosol used for?

Pettit EZ-Poxy Topside Marine Paint Aerosol is a high-gloss topside enamel designed for areas above the waterline and for refinishing decks. Its advanced polyurethane formula creates a glossy, gelcoat-like finish with ultraviolet filters for gloss retention and resistance to finish breakdown.

How should Pettit EZ-Poxy Aerosol be applied?

Shake the aerosol thoroughly before use and apply one thin, even coat per day. After allowing the first coat to dry overnight, lightly sand the surface with 220-grit sandpaper before applying the second coat. Applying two or more coats in one day is not recommended.

How many coats of Pettit EZ-Poxy Topside Marine Paint are recommended?

A minimum of two coats is recommended for Pettit EZ-Poxy. Each coat should be applied as a thin, even film. Avoid excessively heavy application because films greater than 4 wet mils can result in insufficient through-drying and soft paint films.

What temperature range is recommended for applying Pettit EZ-Poxy Aerosol?

The recommended application temperature range is 50°F to 90°F. In cooler conditions, both the air and surface temperatures should remain at or above 50°F for at least 8 hours after application. Do not apply the paint on extremely humid days or when rain is threatening.

How long does Pettit EZ-Poxy take to dry before recoating?

Drying time depends on temperature. The listed recoat time is 8 hours at 90°F, 16 hours at 70°F, and 24 hours at 50°F. The paint should be allowed to dry appropriately before applying the next coat, with only one thin coat applied per day.

How should bare wood be prepared before applying Pettit EZ-Poxy?

Bare wood should be sanded smooth with 80-120 grit sandpaper and solvent cleaned with Pettit 120 Thinner. Screw heads and small holes should be filled with 7050 EZ-Fair, followed by 2018 EZ WoodSealer and one or two coats of 6149 EZ Prime to create a smooth, uniform base before applying the first EZ-Poxy finish coat.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov