Interlux Interstrip Semi-Paste Paint Stripper - MW
This item is currently on backorder. You can still place an order, but it will only ship once it’s back in stock.
Interlux Interstrip 299EQ Semi-Paste Marine Paint Stripper
Interlux Interstrip utilizes a new technology that delivers an effective paint remove system that does not require methylene chloride, a suspected human carcinogen. Interstrip is safe for fiberglass and has a low odor.
- Sold in quarts
- For use above or below waterline
- Safe for fiberglass surfaces
- Has low ddor
- Stays wet longer, allowing longer work time
***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***
How To Apply
PREPARATION: Protect floor or work area with a plastic tarp to catch run-off.
METHOD: With a natural bristle brush, apply a liberal coat of Interstrip Semi-Paste over paint in an area no larger than 10 square feet at one time. Allow the Interstrip Semi-Paste to stand until all layers of existing paint are penetrated. This will vary from as little as 15 minutes for one layer to as long as 2 hours for several coats depending on temperature. Begin scraping. If the paint does not come off easily, reapply and increase the waiting time. After the surface is thoroughly scraped clean, apply Interstrip Liquid Stripper 399 to remove any residual paint or wipe the surface with a rag or pad soaked with Fiberglass Solvent Wash 202.
HINTS: Ventilation and Humidity Control Apply in a well ventilated area. Brush Use a natural bristle brush. Other Enamels removed from fiberglass will reveal gelcoat that has not been exposed to the same level of UV light as the surrounding area. Color variations in the gelcoat are likely.
WARNING: Cancer and Reproductive Harm - P65Warnings.ca.gov
