Pela Pro 14 Liter Marine Oil Change Pump - MW
Express
Toronto, ON
Vancouver, BC
NJ, Warehouse
FL, Warehouse
"Express" items are automated and typically shipped out the next available business day and delivered within 4 days.
In Stock
Purchasing Code Required
To order this product online, please contact us with the quantity you need
and your ZIP / postal code to receive your purchasing code.
Some locations are restricted at this time.
Already have a code? Enter it below to unlock pricing and purchasing.
Pela Pro 14 Liter Marine Oil Change Pump
Whether you have a larger vessel or are servicing multiple engines, this Pela 14 Liter Marine Oil Change Pump is an ideal choice to have in the workshop. With its see-through calibrated container, you can create a powerful vacuum with just 20-25 pumps. The pump unit itself is actually housed inside the container, providing added durability. Its large 14 liter capacity makes for a more efficient oil change operation.
Features:
- Pump 20 To 25 Times In A Row To Create A Powerful Vacuum
- See-Through, Calibrated Container
- Internal Float Switch To Shut Off Extraction Automatically When Full
- Ideal In The Workshop For Servicing Large Engines Or Several Smaller Ones Before Emptying
- Ideal For Boats With Large Diesels and Those With Twin Engines
Specifications:
- Capacity: 14.0 Liters (14.8 Qts)
- Height: 25.5"
- Cylindrical Diameter: 8.35"
- Tubes: 3/16" & 1/4" OD , Length 61" Each
Extension Tube: Length 61"
How to Use Pela Pro 14 Liter Oil Extractor:
- Warm up the oil by running the engine. This will allow the contaminates to mix and to suspend in the oil.
- Remove the dipstick. Note: If you can't hold the dipstick comfortably in your hands, then the oil is too hot! Wait for the oil to cool off a bit.
- Select and insert the appropriate diameter extraction tube into the dipstick pipe until it touches the bottom of the oil pan.
- Connect the main tube to the top of the unit and to the extraction tube.
- Pump the handle 4-15 times in a row to start the vacuum. The unit will extract the oil automatically. Continuous pumping is not required.
- After the oil has been extracted, press the release valve located at the top of the unit for 5 seconds.
- Remove the main tube.
- When pouring the oil into a container, hold the pump as in the photo and pour gently. Do not hold it upside down!
- Bring the used oil to a recycling depot.
Note: No special cleaning is required on the unit. Just empty as much oil as possible (do not store oil long term).
WARNING: Cancer and Reproductive Harm - P65Warnings.ca.gov
