Pettit EZ-Tex Marine Epoxy Repair Kit - MW
This item is currently on backorder. You can still place an order, but it will only ship once it’s back in stock.
Pettit EZ-Tex Marine Epoxy Repair Kit
The Pettit EZ-Tex Epoxy Repair Kit is an easy to use marine epoxy repair compound for use where a high-strength, waterproof, and permanent repair is needed. This unique formula creates a tenacious bond to most surfaces and can be used above or below the waterline, Its buttery consistency will not sag or shrink and is excellent for filling cracks, gouges, and voids. Additionally, EZ-Tex can be used to protect core materials in decking by creating a waterproof barrier during installations of thru-hull fittings, transducers, cleats, snaps, hatches, and deck fittings. This strong compound can also be used to create waterproof repairs on metals such as aluminum jon boats and pontoons.
A convenient 1:1 mixing ratio makes EZ-Tex easy to use-simply mix equal amounts Part A and Part B until the mixture is a uniform water color. EZ-Tex can be sanded, drilled, tapped, sawed, and painted once cured.
Features:
- Size: 4 oz.
- Easy to use 1:1 mix ratio
- High-strength formula
- 100% waterproof when cured
- Can be used above or below the waterline
- Will not sag, shrink, or run
How to Use Pettit EZ-Tex Marine Epoxy Repair Kit
Mixing:
Stir Part A and B components thoroughly to achieve uniform consistency before mixing. EZ-Tex is designed to be mixed 1 to 1 by volume. Mix equal amounts of Part A and Part B until the mixture is a uniform white color. Streaks of color indicate insufficient mixing.
Application:
Once mixed, spread EZ-Tex onto the surface with a putty knife or spatula. Remove excess product before it cures to minimize sanding.
Bonding to Aluminum, Steel, Iron, Bronze, and Other Metals:
- Wipe the surface clean with cotton rags moistened with 120 or 120VOC Brushing Thinner.
- While surface is still wet with solvent, wipe dry with a second clean rag.
- Sand surface to bright metal then brush off sanding residue.
- Apply EZ-Tex with a putty knife, spatula, or squeegee.
- Allow to cure hard then sand until smooth.
Bonding to Fiberglass and Gelcoat:
- Sand repair areas thoroughly with 80-grit sandpaper.
- Wash surface with Pettit 120 or 120VOC Brushing Thinner. Let dry.
- Apply EZ-Tex with a putty knife, spatula, or squeegee, filling the surface imperfections.
- Allow to cure hard then sand until smooth.
Bonding to Wood:
- Thoroughly clean bare wood by wiping with a rag dampened with Pettit 120 or 120VOC Brushing Thinner.
- Sand with 80-grit sandpaper then remove sanding residue.
- Apply EZ-Tex with a putty knife, spatula, or squeegee.
- Allow to cure hard then sand until smooth.
Click to Download Pettit EZ-Tex Epoxy Repair Kit Application Instructions
WARNING: Cancer and Reproductive Harm - P65Warnings.ca.gov
