Pela 2000 2.5 Liter Marine Oil Change Pump - (MW)

Pela 2000 2.5 Liter Marine Oil Change Pump

This Pela 2000 Marine Oil Change Pump only requires 5 to 10 pumps to create a powerful vacuum. You’ll find it ideal for small 4-stroke outboard engines up to 50 HP, sailboats with small diesel engines (9 HP to 18 HP), or PWC's with 4-stroke engines. It has a capacity of 2.5 liters, making this marine oil change pump a smart choice for smaller engines.

Features:

• Pump 5 To 10 Times In A Row To Create A Powerful Vacuum
• Capacity Of 2.5 Liters (2.64 Qts)
• Ideal For Small 4-Stroke Outboard Engines Up To 50 HP
• Ideal For Sailboats With Small Diesel Engines (9 HP To 18 HP)
• Ideal For PWC'S With 4-Stroke Engines

Specifications:

• Height: 17.5" (Assembled) 
• Diameter of Container: 7" 
• Tube: Probe 3/16" OD, Length 43" 
• Clear Section: 3/8" OD, Length 39"

How to Use Pela 2000 2.5 Liter Marine Oil Change Pump

• Warm up the oil by running the engine. This will allow the contaminates to mix and suspend in the oil.
• Remove the dipstick. Note: If the dipstick can't be held comfortably in your hands, then the oil is too hot! Wait a bit!
• Insert the extractor tube into the dipstick pipe until it reaches the bottom of the oil pan.
• Firmly place the tube cap onto the pan. Firmly place the tube cap onto the container.
• Attach the pump to the top of the container.
• 3. Pump 10 to 20 times in a row to create the vacuum (5-10 times for PELA 2000). Always use 2 hands.
• The unit will automatically extract the oil. Continuous pumping is not required.
• To stop extraction at any time, pull the tube out of the fluid.
• After all the oil has been extracted, remove the tube cap from the container with a twisting motion. Remove the pump. Empty gently into a container. Bring the used oil to a recycling depot.

Note: No special cleaning is required on the unit. Just empty as much oil as possible.

Note: Not for use with gasoline or other flammables.

WARNING: Cancer and Reproductive Harm - P65Warnings.ca.gov