Anchor Line 1/2 X 200' W/15' Chain 1/4" G4-5/16" Shackle - (MW)

Lewmar Premium 3-Strand Anchor Rodes - Marine Grade with Rope & Galvanized Chain

Lewmar anchor rodes are a great economical choice for boaters looking for a windlass rode. These rodes are designed to work with the rope-chain gypsies fitted to all Lewmar Windlasses and help it operate smoothly. Keep in mind the size of the rode you have chosen and if your anchor locker has enough depth to store the Lewmar Anchor Rodes.

The Lewmar Premium 3-Strand Anchor Rode is made of 3-Strand nylon rope. There are several grades of this rope available. Make sure you are always using a premium windlass grade rope and ensure that the diameter is ½” (.500) or slightly larger, smaller sizes work poorly in ½ gypsies. Lower quality 3-strand rope tends to not lay properly.

Lewmer Anchor Rodes are manufactured with ¼” -5/16” shackles and are calibrated for even pitch. The smooth rope-to-chain transition is welded for greater strength. The whipping of the rope is hand sewn to help prevent unraveling.

These rodes can take on wear and tear and especially in salt-water conditions. If your lines begin to stiffen, soak in a bucket of fresh water and fabric softener. (the longer the better). This should repair some of the flexibility. However, if this doesn’t work your Lewmar anchor rodes should be replaced.

Features:

• Designed to complement the rope-chain gypsies fitted to all Lewmar windlasses
• 1/4" G4 - 5/16" Shackle
• Calibrated for even pitch
• Hot dip galvanized to minimize corrosion
• Welded for high strength
• Smooth rope-to-chain transition
• Helps your windlass operate smoothly
• Hand-sewn whipping guarantees against unraveling

Frequently Asked Questions

What are Lewmar Premium 3-Strand Anchor Rodes designed for?

Lewmar Premium 3-Strand Anchor Rodes are designed for use as windlass rodes with the rope-chain gypsies fitted to Lewmar windlasses. The rode combines 3-strand nylon rope with hot-dip galvanized chain and is designed to provide a smooth transition between the rope and chain during windlass operation.

What size rope is recommended for Lewmar Premium 3-Strand Anchor Rodes?

The product information recommends using premium windlass-grade 3-strand nylon rope with a diameter of 1/2 inch (.500) or slightly larger. Smaller rope sizes may work poorly in 1/2-inch gypsies, while lower-quality 3-strand rope may not lay properly.

What type of shackle and chain are used with Lewmar Premium Anchor Rodes?

Lewmar Premium Anchor Rodes are manufactured with 1/4- to 5/16-inch shackles and calibrated for even chain pitch. The chain is hot-dip galvanized to help minimize corrosion, and the rope-to-chain transition is welded for high strength.

How do Lewmar Premium Anchor Rodes help a windlass operate smoothly?

These rodes are designed to complement the rope-chain gypsies fitted to Lewmar windlasses. The calibrated chain and smooth rope-to-chain transition help the rode move through the windlass properly during operation.

How should a stiff Lewmar Premium 3-Strand Anchor Rode be maintained?

If the line begins to stiffen, the product information recommends soaking it in a bucket of fresh water and fabric softener, preferably for an extended period. If this does not restore flexibility, the Lewmar anchor rode should be replaced.

How is the rope on Lewmar Premium Anchor Rodes finished to help prevent unraveling?

The rope uses hand-sewn whipping to help prevent unraveling. The rope-to-chain transition is also welded for high strength, providing a finished connection between the 3-strand nylon rope and galvanized chain.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov