3M 5200 Adhesive-Fast Cure - White 10oz - (MW)

3M 5200 Polyurethane Fast Cure Adhesive-Sealant

3M 5200 Polyurethane Fast Cure Adhesive Sealant is a one-component sealant designed to meet the high demands of the marine environment. 5200 Fast Cure provides strong watertight bonds and has permanent adhesion to wood, gelcoat, and fiberglass. 3M designed this sealant to be flexible, it allows for structural movement and dissipation of stress that may be caused by vibration, swelling, shrinking or shock.

5200 Fast Cure Sealant creates tough bonds above or below the waterline and is ideal for the following applications: fiberglass deck to hull, through hull fittings, wood to fiberglass, portholes and deck fittings, motors on fiberglass transoms, under moldings, hull seams above and below water line, and deck housing.

• Faster curing version of 3M 5200.
• Extremely strong and retains its strength above or below the waterline.
• Stays flexible.
• Watertight bonding/sealing of fiberglass, gelcoat and wood.
• Best when NO Removal is anticipated.
• Color is white.

Specifications:

• Adhesive Type: Polyurethane
• Application: Hand or pressure caulk
• Tack-free Time: 1 Hour

3M 5200 Polyurethane Fast Cure Adhesive Sealant Application Information:

Clean all surfaces before application. It is recommended to use an adhesive cleaner.

• Cut the nozzle to desired bead size.
• Puncture seal inside the threaded nozzle end and screw on nozzle.
• Apply 3M 5200 Fast Cure to the seam or part to be bonded. Tool material to desired appearance.
• Remove excess material with adhesive cleaner.

Frequently Asked Questions

What is 3M 5200 Polyurethane Fast Cure Adhesive-Sealant used for?

3M 5200 Polyurethane Fast Cure Adhesive-Sealant is a one-component marine sealant designed to create strong, watertight bonds above or below the waterline. It can be used for applications such as fiberglass deck-to-hull joints, through-hull fittings, wood-to-fiberglass bonding, portholes, deck fittings, hull seams, and deck housings.

What materials can 3M 5200 Fast Cure bond and seal?

3M 5200 Fast Cure provides permanent adhesion to wood, gelcoat, and fiberglass. It is formulated to remain flexible, allowing the bonded materials to accommodate movement and stress caused by vibration, swelling, shrinking, or shock while maintaining a watertight seal.

Can 3M 5200 Fast Cure be used above and below the waterline?

Yes. 3M 5200 Fast Cure is designed for strong, watertight bonding and sealing both above and below the waterline. The product description specifically lists applications including hull seams, through-hull fittings, and other marine components in these areas.

Is 3M 5200 Fast Cure intended for applications where removal may be needed?

3M 5200 Fast Cure is best suited for applications where no removal is anticipated. It forms a permanent bond and is designed to retain its strength while remaining flexible in the marine environment.

How should 3M 5200 Fast Cure Adhesive-Sealant be applied?

Clean all surfaces before application, with an adhesive cleaner recommended. Cut the nozzle to the desired bead size, puncture the seal inside the threaded nozzle end, and attach the nozzle. Apply the sealant to the seam or parts being bonded and tool it to the desired appearance. Remove excess material with adhesive cleaner.

How quickly does 3M 5200 Fast Cure become tack-free?

3M 5200 Polyurethane Fast Cure Adhesive-Sealant has a listed tack-free time of approximately 1 hour. The sealant is a one-component polyurethane product and can be applied by hand or with a pressure caulk application method.

California Residents: WARNING Cancer and Reproductive Harm - P65Warnings.ca.gov